M8 Microneedling Machine Derma Microneedle Pen Dr Pen

Description

Description about M8 Dr Pen

✔ 6 speed levels can meet different needs of treatment.
✔ Low battery warning and charging status displayL/F, it’s more convenient to use.
✔ USB with type-C interface, it’s universal USB interface on the market, convenient to charge.
✔LED screen, visible digital display
✔3 bayonets lock design for needle cartridge, work efficiently and stably.
✔Ultra-long working time, big capacity battery to ensure the pen working efficiently.
✔Range of needle depth: 0-2.5 mm
✔New 11-pin & 16-pin, fine 0.18mm needles, better treatment results, less trauma and faster recovery

Packaging included：
1pcs pen,1pcs usb cable,1pcs adapter, 2pcs 16pin needles,1pcs manual pen,1pcs box.

Needle Cartridge Options

• 11-pin
• 16-pin
• 18-pin
• 24-pin
• 36-pin
• 42-pin
• Round nano
• Square nano
• 3D nano
• 5D nano

How To Use

Important: Microneedling cartridges must be sterilised before each use to ensure the treatment is safe and hygienic. It is essential to follow these steps carefully to ensure that the microneedling cartridges are properly sterilised. Here are the steps to sterilise microneedling cartridges:

1. First, ensure that you have all the necessary equipment for sterilization; gloves, isopropyl alcohol solution (70% or above) and a clean container to hold the solution.
2. Put on your gloves to avoid contaminating the cartridges during the sterilisation process.
3. Check on your cartridge; ensure the needles are in perfect condition (i.e. not bending) and remove any debris.
4. Pour enough alcohol solution into the container and dip the cartridge needle into a sterilisation container, then soak for a couple of minutes.
5. If you have alcohol solution in a spray model, you can spray it towards the needle head of the cartridge.
6. Once the sterilisation is complete, allow the cartridge to air dry before using it.
7. Finally, your cartridge is ready for use.

Please read our detailed instruction guide.

1. Comprehensive instructions are available on our website under our FAQS section.
2. The cartridge comes in a sterile pack.
3. Double-cleanse (cleanse and repeat) then wipe the skin clean. Fully tie back your hair, away from your face.
4. Work in small areas and apply Hyaluronic Acid serum to each area before needling. This will help to ensure that the pen does not drag or pull on the skin. The recommended pattern to move the pen for best results is vertical, horizontal, and then diagonal in both directions. Using a light pressure and without dragging, repeat this motion over each area two times.
5. Safely dispose cartridge after every use.

DO NOT USE

• On open wounds.
• On acne or irritated skin.
• If irritation occurs.
• One cartridge more than once.